How Much C4 for a Stone Wall


I’m not sure what you are asking.

Rust – C4 Raiding Cost For ALL WALLS | #Shorts

When it comes to demolition, there is a lot that goes into planning and execution. One of the most important factors is choosing the right amount of explosives. This can be tricky, as too little will mean the job isn’t done properly and too much could cause serious damage.

So, how much C4 should you use for a stone wall? Well, it depends on the size and thickness of the wall. A general rule of thumb is to use 1 pound of C4 for every 2 square feet of surface area.

So, if you’re demolishing a 10×10 section of stone wall, you would need 20 pounds of C4. Of course, this is just a starting point – your actual needs may vary depending on the specific circumstances. But following this guideline should help you stay safe and get the job done right.

How Much C4 And Satchels for Stone Wall

When it comes to destroying a stone wall, you’ll need quite a bit of C4 and satchels. The amount you’ll need will depend on the size of the wall as well as its thickness. A good rule of thumb is to use 1/2 pound of C4 for every square foot of wall.

So, if you’re looking at a 10×10 section of wall, that would be 5 pounds of C4. As for satchels, you’ll need one per every two feet of wall. So, in the same example, you’d need 10 satchels.

How Much C4 for a Stone Wall
How Much C4 for a Stone Wall 4


How Much Damage Does a C4 Do to a Stone Wall?

A C4 explosive typically has a blast yield of around 10 pounds (4.5 kg) in a general purpose configuration. This means that the explosive force is equivalent to that of approximately 10 pounds (4.5 kg) of TNT. When detonated, the explosion creates a shockwave that can cause serious damage to nearby objects and structures.

In terms of damage to a stone wall, it depends on the thickness of the wall and the distance from which the C4 is detonated. If the wall is thin and the C4 is detonated close to it, then the blast wave will cause significant damage to the wall, potentially causing it to collapse. If the wall is thicker and/or detonation is further away, then there will be less damage but still enough to potentially create a hole in the wall.

How Many C4 Do You Need for a Stone Wall Ark?

When it comes to building in Ark: Survival Evolved, one of the most important things you need to know is how many C4 explosives you’ll need to take down a stone wall. The answer, unfortunately, is not as cut and dry as it could be. It really depends on a number of factors, including the size and thickness of the wall, as well as the distance you are from it when detonating the C4.

In general, though, you’ll need at least 3-4 charges of C4 to take down a basic stone wall. If the wall is particularly thick or large, you may need 5 or more charges. And if you’re trying to destroy a section of wall that’s far away from you, it’s possible that even 6-7 charges may not be enough.

Of course, all of this assumes that your aim is true and that you place the charges correctly. If not, then even the most powerful explosives won’t do much damage. So make sure to practice your aiming before taking on any real walls!

Does C4 Break Stone Wall?

If you’re looking to take down a stone wall, then you’ll want to use C4. This explosive is incredibly powerful and can easily destroy most types of walls. Keep in mind that C4 is also very dangerous, so be sure to handle it with care.

How Many C4 Does It Take to Break Stone High Wall?

It takes approximately 3 C4 charges to destroy a stone high wall in most cases. The amount of explosives needed may vary slightly depending on the size and thickness of the wall, but three charges should be sufficient to break through most stone walls.


In order to blow up a stone wall with C4, you would need around 5 pounds of the explosive. This is based on the fact that C4 has an explosion yield of around 1 ton per 4 pounds.

Latest posts by di_community (see all)
Leave A Reply

Your email address will not be published.