How to Play Tenor Drums


Tenor drums are an important part of a marching band or drumline. They provide the high-pitched, driving sound that helps to keep the beat and add excitement to the music. If you’re interested in playing tenor drums, there are a few things you should know.

In this blog post, we’ll give you a brief overview of how to play tenor drums. Tenor drums are typically played with four mallets, two in each hand. The right hand usually plays the higher notes while the left hand plays the lower notes.

To produce a sound, you will strike the drumhead with your mallets and then let go so that the drumhead can vibrate freely. You can create different sounds by striking the drumhead in different ways—for example, you can produce a softer sound by striking near the edge of the head, or a louder sound by striking closer to the center.

  • First, find a tenor drum that is the right size for you
  • Next, put on a pair of drumsticks that are the right size for your hands
  • Now, sit in front of the drum with the drumsticks in your hands
  • Be sure to hold the sticks loosely in your hands so you don’t tense up while playing
  • To play a basic beat, start by hitting the center of the head with one stick and then alternate between left and right sides
  • You can also try adding in some accents by hitting the rim of the drum or using different parts of the sticks to create different sounds
How to Play Tenor Drums
How to Play Tenor Drums 4


How Do I Hold the Drumsticks When Playing Tenor Drums

When playing tenor drums, it is important to hold the drumsticks correctly in order to produce the best sound. The grip for tenor drums is different than that of other percussion instruments because the player needs to hold two sticks at once. To properly hold the sticks, place your left hand palm up and your right hand palm down.

Both hands should be holding the sticks near the ends, with your fingers wrapped around and your thumbs resting on top.

What is the Best Way to Tune Tenor Drums

There is no one definitive answer to this question as different drummers will have different preferences when it comes to tuning their tenor drums. However, there are some general tips that can be followed in order to get the best sound out of your tenor drums. Firstly, it is important to make sure that the heads are properly tensioned.

The batter head should be tight enough so that it produces a clear and consistent sound, but not so tight that it becomes difficult to play. The resonant head should also be tuned appropriately – too loose and the drum will sound muffled, too tight and it will sound harsh. It is also worth experimenting with different types of mallets in order to find the ones that produce the sound you are looking for.

Softer mallets will result in a mellower sound, whereas harder ones will create a brighter tone. Try out a few different options and see what works best for you. Finally, make sure to experiment with the positioning of the drum within your kit.

Different positions will produce different sounds, so play around until you find the perfect spot for your tenor drums.

What are Some Basic Strokes Used When Playing Tenor Drums

Tenor drums are a type of drum used in many marching band programs. They are typically played with four sticks, two in each hand. The most common strokes used on tenor drums are single stroke rolls, double stroke rolls, paradiddles, flams and diddles.

Single stroke rolls are made by alternating between the right and left hand while keeping a consistent rhythm. Double stroke rolls involve playing two strokes in succession with each hand before switching to the other hand. Paradiddles are made by alternating between right-left-right-left-right-left and left-right-left-right-left-right sequences.

Flams involve striking the drum with both sticks simultaneously and then quickly pulling one stick away so that only one stick makes contact with the head of the drum. Diddles involve playing a sequence of single strokes followed by a double stroke (e.g., right-left-right double).

How Do I Play a Roll on Tenor Drums

If you want to play a roll on tenor drums, there are a few things you need to do. First, you need to make sure that your drum is in the correct position. To do this, you will need to find the middle of the drum.

Once you have found the middle of the drum, you will need to place your hand on the head of the drum so that your thumb is on one side and your fingers are on the other side. Next, you will need to take a stick and hold it in your dominant hand. You will then need to place the stick in between your thumb and first finger so that it is perpendicular to your hand.

Once you have done this, you will then need to strike the head of the drum with the stick. Be sure to strike the head of the drum in an up and down motion so that you create a rolling sound.

How Can I Develop Good Technique When Playing Tenor Drums

Tenor drums are an essential part of the drumline in many marching bands. They provide the high-pitched, bright sound that helps to carry the melody and keep the tempo of the music. While they may seem like a small part, tenor drums can actually be quite challenging to play well.

In this article, we’ll give you some tips on how to develop good technique when playing tenor drums. The first thing you need to do is make sure you’re using proper grip. This means holding the sticks with your thumb and first two fingers, and keeping your index finger close to the stick for balance.

You should also position your hands so that when you strike the drum, your arms are in line with your body – not crossed over or flying out to the side. This will help you generate more power and control from your strokes. Next, it’s important to practice accuracy and consistency in your playing.

When striking the drumhead, aim for the same spot each time so that the sound is even and consistent. It takes a lot of practice to get this down perfectly, but it’s worth it! Try setting up a metronome or other metrical device so that you can keep track of how evenly spaced your strokes are while you practice.

Finally, make sure you’re using proper sticking technique. This means alternating between right and left hand (or vice versa) as you play. Not only does this create a more interesting sound, but it also helps to prevent fatigue in your arms and hands since both sides of your body are getting a workout!

By following these tips, you’ll be on your way to becoming a great tenor drummer in no time!


Tenor drums are an important part of many marching bands and drum corps. They provide the high-pitched, piercing sound that helps to cut through the brass and woodwinds and add excitement to the music. While they may seem daunting to beginners, tenor drums are actually relatively easy to play.

In this article, we’ll show you how to play tenor drums in just a few simple steps. The first thing you need to do is find a good pair of sticks. Tenor drumsticks are usually made of hickory or maple, and they should be about 18 inches long.

You’ll also need a practice pad or something similar to help you get used to the feel of the sticks before you start playing on the actual drum. Once you have your sticks and practice pad, it’s time to start learning some basic strokes. The most important stroke for tenor drums is the single stroke roll.

This stroke is played by alternating between right and left hand while keeping a consistent rhythm. Start slowly at first, and then gradually increase your speed as you get more comfortable with the stroke. Once you’ve mastered the single stroke roll, you can move on to other strokes such as double strokes (played with both hands at once) and paradiddles (a series of fourstrokes played in succession).

These more advanced strokes will take some practice to master, but they’ll add even more excitement and versatility to your playing. With these few simple steps, you’ll be well on your way to becoming a tenor drummer in no time!

Latest posts by di_community (see all)
Leave A Reply

Your email address will not be published.